Hancock, New Hampshire

Hancock Home Page  |  Hancock Site Map
Cemetery RFP | DPW RFP | Library RFP | Selectboard RFP


CEMETERY TRUSTEES
  • There are no active RFPs at this time

SELECTBOARD RFPs
  • There are no active RFPs at this time

DEPARTMENT OF PUBLIC WORKS RFPs
  • The following RFPs are active  (April 2, 2013)

    • Approximately 25000 yards 1 inch crushed gravel
    • 6-Wheel 19,500 GVW Plow Truck
      • OBJECTIVES OF THIS RFP
        The Town of Hancock New Hampshire is soliciting proposals for the purchase of a new 19,500 GVW municipal plow truck. This truck will be used for municipal road/bridge maintenance and construction, including snow removal operations. The proposal should include those items that are necessary for this vehicle to be utilized in a municipal setting that includes snow removal operations to include a front plow, possibly a wing plow and a sander that will be slid into the rear dump body. The installation of the live hydraulics, plow frame, sander controls and lighting package will be requested under a separate proposal.
      • DOWNLOAD THE RFP: 6-Wheel 19,500 GVW Plow Truck (PDF 62 KB)
      • Deadline for submission: April 15, 2013, 3:00 p.m.
      • Posted on March 28, 2013
    • 19,500 GVW Plow Truck body and equipment
      • OBJECTIVE OF THIS RFP
        The Town of Hancock New Hampshire is soliciting proposals for the installation
        of a wet hydraulic system, dump body, plow frame and sander controls to
        installed on a 2013 19,500 GVW cab and chassis. This vehicle will be used in a
        municipal setting with full winter snow removal and ice control duties. We will be
        using an existing front snow plow (Everest 9’6” Model OWRL11451540) and a 9’
        Swenson hydraulic spreader that will need hydraulic connections to match the
        existing hydraulic connections on each piece of equipment. All wiring will be
        protected by wire wrap and/or conduit. All connections will be waterproofed and
        heat shrinked to avoid corrosion and water intrusion. All hydraulic lines will be
        supported and protected to avoid unnecessary strain and wear/abrasion during
        normal use of the vehicle.
      • DOWNLOAD THE RFP: 19,500 GVW Plow Truck body and equipment (PDF 65 KB)
      • Deadline for submission: April 15, 2013, 3:00 p.m.
      • Posted on March 28, 2013

LIBRARY RFPs
  • There are no active RFPs at this time

Hancock Home Page  |  Hancock Site Map
Cemetery RFP | DPW RFP | Library RFP | Selectboard RFP